Lepro Smart B22 LED Bulb, 806lm, 2 pack
An 806 lm colour B22 bulb on 2.4 GHz Wi-Fi and Bluetooth, run from the Lepro app or by voice through Alexa and Google Assistant. No hub needed.
Works with
Features
Which features work depends on your hub. Apple Home, Home Assistant and others each expose different ones.
About
An 806 lm RGB and tunable white bulb on a B22 bayonet cap, 8.5 W and dimmable from 1% to 100%. It pairs over Bluetooth and 2.4 GHz Wi-Fi to the Lepro app, where the AI Lighting Design Assistant turns a prompt, a mood or a photo into a scene. The Amazon UK listing sells two bulbs.
Pairing
- Power the bulb on; if it does not blink within 10 seconds, switch it off and on three times (off, on, off, on, off, on) with 1 to 2 seconds between each, until it blinks rapidly and can be added in the Lepro app.
- Then in Google Home
- Open the Google Home app, tap +, then Set up device.
- Choose Works with Google Home and find the brand.
- Sign in, pick the device, then choose its room.
- Power the bulb on; if it does not blink within 10 seconds, switch it off and on three times (off, on, off, on, off, on) with 1 to 2 seconds between each, until it blinks rapidly and can be added in the Lepro app.
- Then in Amazon Alexa
- Open the Alexa app, go to Devices, then tap +.
- Choose Add device and pick the brand, or enable its skill.
- Let discovery run, then add the device to a group.
About 2 minutes. Put the device into pairing mode first, then add it to your hub.
