Tapo L535E Matter Smart Bulb, E27
A 1055 lm colour E27 bulb with Matter over Wi-Fi and energy monitoring. Apple Home, Alexa, Google Home and SmartThings control it directly; no Tapo hub needed.
Works with
Features
Features by hub: support differs between Apple Home, Home Assistant and others.
About
A 1055 lm colour bulb on an E27 cap with Matter over Wi-Fi, schedules and energy monitoring in the Tapo app. It joins your Wi-Fi directly, so no Tapo hub is needed. The Amazon UK listing sells a 2-pack.
Pairing
- Turn the bulb off and on 3 times with a 2 second pause between each; it blinks 3 times to confirm the Wi-Fi settings are reset.
- Then in Apple Home
- Open the Home app, tap +, then Add accessory.
- Scan the Matter code from the device or its app, or enter it by hand.
- Pick a room and give the device a name.
- Turn the bulb off and on 3 times with a 2 second pause between each; it blinks 3 times to confirm the Wi-Fi settings are reset.
- Then in Aeotec Smart Home Hub
- Open SmartThings, tap +, then Add device.
- Choose Matter, then scan the code from the device or its app.
- Pick a room and give the device a name.
- Turn the bulb off and on 3 times with a 2 second pause between each; it blinks 3 times to confirm the Wi-Fi settings are reset.
- Then in Google Home
- Open the Google Home app, tap +, then Set up device.
- Choose New device, then scan the Matter code from the device or its app.
- Pick a home and a room, then give the device a name.
- Turn the bulb off and on 3 times with a 2 second pause between each; it blinks 3 times to confirm the Wi-Fi settings are reset.
- Then in Amazon Alexa
- Open the Alexa app, go to Devices, then tap +.
- Choose Add device, then Matter, and scan the code from the device or its app.
- Add the device to a group and give it a name.
About 2 minutes. Put the device into pairing mode first, then add it to your hub.
